Cody P.Private profile: Upwork shows its earnings only to signed-in members, so we check it every few weeks, not daily. MRR here is a rough estimate (Upwork's six-month earnings ÷ months active). Last read Sep 9, 2026.

Hi, My name is Cody Phipps and I am freelancer located in Austin, Tx. I am Electrical Engineer with a focus in power and control systems. While I attended Louisiana Tech University, I worked on many projects dealing with designing and printing PCBs. After started my career in transmission line studies, I quickly found out I wanted to develop electronics for my career. I started freelancing and evenutally started an LLC to chase my dreams as a product developer. Since then, I have developed over 80 products for many fields including medical, military/government and industrial. Products that I have develop include: - IoT and wirless capabilities (Wifi, BLE, Thread, LoRa, etc) - AC and DC power systems -Solar and alternate energy systems -Wearables -Many types of sensors - accelerators, temperature, humidity, etc In addtion to design, I also offer printed circuit board assembly and I have built a majority of my designs myself. I achieve this with my personal line that I have which is capable of building small run jobs (up to 500 units a week). I also have access to a larger line for much bigger manufacturing jobs. Here is the typical breakdown of what you would expect from my services: Research and Development: - Identify major components - Draw breadboard proof of concept block diagram - Build breadboard proof of concept - *See firmware Development Section Schematic Capture: - Draw symbols and footprints of components not in library already - Capture Power circuit - Capture MCU circuit - Capture peripheral circuits - Export Bill of materials Layout Design: - Determine board shape, constraints and layer count - Floor plan components - Draw power and ground planes - Trace Critical traces - Trace the rest of the nets - Run DRC - Draw Fabrication Drawing - Draw Assembly Drawing - Export Gerbers, Drills, OBD++, PnP, etc - Send Boards off to Fab - Order stencils, Components, etc Firmware Development: - Develop Firmware for POC - Add finishing touches to the firmware Build and Test: - Develop Test plan - Check in Parts - Assemble boards - Perform Testing - Write Product specification - Determine next steps I can give virtual tours of products I'm working on as well as give you five references to ones I developed products for and with. Thanks, Cody Phipps